

_1795145155_WNo_1332d889.webp)
Guyana continues to strengthen its position in the global offshore oil and gas industry as development activities in the Stabroek Block expand beyond oil production into gas and condensate resources.
On November 12, 2026, ExxonMobil announced a final investment decision (FID) for the Longtail development offshore Guyana, following government and regulatory approvals. With an estimated investment of US$12.5 billion, Longtail will become the eighth offshore development in the Stabroek Block and is expected to begin production in 2030.
The project is operated by ExxonMobil Guyana Limited, which holds a 45% interest, alongside Hess Guyana Exploration Limited with 30% and CNOOC Petroleum Guyana Limited with 25%.
Longtail marks a significant shift in the development of Guyana's offshore resources. While previous developments in the Stabroek Block have primarily focused on oil production, Longtail is designed to develop non-associated gas and condensate-rich reservoirs, expanding the region's offshore production capabilities and potential gas utilization opportunities.
Located approximately 200 kilometers offshore Guyana, in the southeastern portion of the Stabroek Block, the Longtail development will utilize a new-build Floating Production, Storage and Offloading (FPSO) vessel.
The FPSO is designed to process up to 1.2 billion standard cubic feet of gas per day and produce up to 250,000 barrels of condensate per day. It will also have a storage capacity of approximately 2 million barrels of condensate and operate in water depths of around 1,750 meters.
The development is expected to include approximately 45 subsea production and injection wells connected to the FPSO. The project also incorporates gas reinjection and gas-export facilities, with potential gas transportation to shore subject to future investment decisions, market demand and infrastructure development.
The FPSO construction and installation contracts have been awarded to SBM Offshore, which will also operate the vessel for an initial period of 10 years. The vessel design is based on SBM Offshore's Fast4Ward program, incorporating its tenth new-build multi-purpose floater hull.
Meanwhile, Saipem has received authorization to proceed with the remaining execution activities under its subsea engineering, procurement, construction and installation (EPCI) contract, covering subsea structures, umbilicals, risers and flowlines (SURF).
Together, the FPSO and subsea infrastructure form the core of the Longtail offshore development, requiring coordinated engineering, equipment manufacturing, fabrication, installation and commissioning activities.
Gas-focused offshore developments involve a range of processing operations designed to handle produced gas, condensates and associated fluids. Depending on the process configuration, offshore facilities may incorporate gas separation, treatment, compression, cooling, condensate handling and other processing systems.
These systems require equipment capable of operating under demanding conditions, including elevated pressures and temperatures, exposure to corrosive process fluids and the limitations associated with offshore space, weight and maintenance.
Material selection is therefore an important part of pressure vessel and heat exchanger design. Carbon steel and alloy steel may provide the structural requirements for many equipment applications, while corrosion-resistant materials are specified where process conditions require additional protection.
Depending on the fluid composition, temperature, pressure and corrosion assessment, materials such as stainless steel, duplex stainless steel, nickel alloys and other corrosion-resistant alloys may be selected for specific equipment or wetted surfaces.
In applications where structural strength and corrosion resistance need to be combined, clad steel plate offers an alternative to manufacturing the entire component from solid corrosion-resistant material.
Clad plate combines a structural base metal with a corrosion-resistant cladding layer bonded through processes such as explosion cladding or roll bonding. The base metal provides the required mechanical strength, while the cladding material is selected according to the corrosion resistance and service requirements of the equipment.
For pressure vessel and heat exchanger manufacturers, clad plate can be used in applications where the process-side surface requires a different material performance from the structural section.
Depending on the equipment design and applicable specifications, clad plate may be considered for pressure vessel shells, heat exchanger components and other fabricated equipment used in offshore processing systems.
Common material combinations may include:
· Carbon steel + Stainless Steel 316L
· Carbon steel + Duplex Stainless Steel 2205
· Carbon steel + Super Duplex Stainless Steel 2507
· Carbon steel + Nickel Alloy 625
· Carbon steel + Nickel Alloy 825
· Carbon steel + Monel 400
The selection of the cladding alloy and base metal depends on the design conditions, corrosion requirements, applicable material standards and fabrication specifications.
Beyond the material itself, clad plate fabrication involves additional considerations such as bonding quality, dimensional control, forming requirements, machining allowance, inspection and traceability. These factors become particularly important when clad plate is subsequently processed into pressure vessel and heat exchanger components.
FUGO TECH manufactures clad plates and special-alloy plates and provides machining for industrial equipment components, including tube sheets, baffle plates and dish heads.
These products may be relevant to pressure vessel and heat exchanger manufacturers when clad or special-alloy materials are specified for their equipment.
By manufacturing clad plates in-house before machining, FUGO TECH can coordinate material production and component processing within its manufacturing scope. This helps customers discuss material requirements, machining dimensions and production planning with one manufacturing supplier.
For gas-processing and other industrial projects, the final material combination, inspection scope and documentation requirements should be confirmed against the approved drawings and purchaser specifications.
Learn more about FUGO TECH: www.fugo-tech.com, contact: sales@fugo-tech.com

Fugo Tech is focused on the manufacturing of clad metal plate and distributes the Stainless Steel, Titanium, Nickel Alloy, Zirconium and other non-ferrous metal pipes, fittings, and flanges.